Foundations and construction:

Foundations: Reinforced concrete, with two layers sheet hydro-insulation and waterproof membrane at the perimeter.

Drainage: Perimeter drainage pipe at foundations, laid in an excavation with rubble fill up to the surface in order to lead the rainwater to the drainage prism out of the outlines of the building.

Construction: Beamless, monolith, of reinforced concrete with flat roof and two layers sheet hydro- and thermo-insulation XPS 10 cm., with protection cover of rubble.

Constructive height of apartments: 3.00 m.

Masonry:

Brick block Porotherm with excellent thermo-insulation properties

Facade: Brick block Porotherm 25 cm.

Separation walls between apartments and between apartments and common parts: Brick block Porotherm 25 cm.

Separation walls inside the apartments: Brick block Porotherm 12 cm.

FaCade coating:

Thermo-insulation EPS with thickness of 6 cm., plastering and silicone coat Baumit.

EXterior joinery and glazing:

Five chamber PVC profile by VEKA, with mounting width of 70 mm, white colour, with biaxial opening of doors and windows. Maximum aperture. French windows.

Glazing: glass insulation unit made of (from inside out): 6 mm float glass +12 mm. air chamber + 4 mm. float glass at the upper section of the windows. At the lower sections up to 1,08 m. height shock resistant glass insulation unit is installed, made of 8 mm triplex +12 mm. air chamber + 4 mm. float glass.

Entrance doors to buildings of metal profile with shock resistant glazing.

Interior joinery:

Entrance doors to apartments: armoured with construction of steel profiles 1.5 mm with integral steel sheet 1,5 mm. thick from the outer side of the wing. Insulation made of stone wadding. Final covering of veneer Fineline Oak. Italian coding locks CISA with trilateral four grade locking.

Interior doors: MDF with laminate cover, colour bleached oak including railings and lining.

Final coatings of walls and ceilings:

Bathroom walls: lime- cement plastering and coating with faience tiles with frieze by Saloni (Spain), series Lino, measures 31х60 cm.

Kitchen walls:  lime- cement plastering and coating with faience tiles with frieze by Saloni (Spain), series Cotton, measures 31х60 cm.

Walls in living rooms, bedrooms and hallways: gypsum plastering and smooth latex paint.

Ceilings in living rooms and bedrooms: gypsum plastering and smooth latex paint, partially suspended ceiling of plastered board and smooth latex paint.

Ceiling in bathrooms and hallways: suspended ceiling of plastered board and smooth latex paint.

Floorings:

Kitchen flooring: Porcelain tiles by Saloni (Spain), series Dallas, measures 30х30 cm.

Bathroom flooring: Ceramic tiles by Saloni (Spain), series Lino, measures 30х30см.

Living room and bedroom flooring: Laminate parquet KronoSpan 8 mm. thick, with floating mounting (SwissLock ssytem), HDF body, class of resistance to fading 32, EC Quality Certificate, colour Oak or similar including proportional part of PVC edge.

Hallway flooring: Porcelain tiles with frieze by Saloni (Spain), series Jura, measures 30х30 cm. including edges of the same material.

Terrace flooring: Porcelain tiles by Saloni (Spain), series Andes, measures 30х30 cm. including edges of the same material.

Balcony flooring: Granite tiles by Saloni (Spain), series Rubielos, measures 25х25 cm. including edges of the same material.

Water supply and Sewage installation and sanitary equipment:

Water mains: polypropylene pipes laid on the surface of the walls and ceiling slabs with industrial water metering joint for every apartment.

Sewage: PVC pipes in manholes.

Kitchen: deviations for sink, laundry machine and dishwashing machines.

Bathroom equipment:

-         Bath tub (if envisaged for the apartment in the project): metal, enamelled, Fayance type or similar.

-         Shower – trough (if envisaged for the apartment in the project): ceramic type Vidima Ideal Standard или подобно.

-         Reinforcement of bath tub/shower: by Jacob Delafon (France), series Prima.

-         Sink: Sink semi-console type by Jacob Delafon (France), series Ola.

-         Reinforcement of sink: by Jacob Delafon (France), series Prima.

-         Toilet pan: Monoblock by Jacob Delafon (France), series Ola, SoftClose system.

-         Electric water heater mounted with capacity according to the project, with enamelled water container.

Electric installation:

Laying cables under project at the surface of the walls and ceiling tiles, lighting points to sockets, with individual electrometer for every apartment.

Mounted electric mechanisms (wall plugs and switches) model Alia (manufacturer Schneider Electric). In kitchen – additional wall plugs above the kitchen board.

Mounted lighting bodies for the common areas and the surrounding space.

Laying cables for telephone, intercom and doorbell installation and cable TV installation.

Air conditioning:

Installed pipe joints and deviations of condense for outer and interior bodies.

Ventilation:

Kitchen: individual installation of air deviation (absorber) for every kitchen.

Bathroom: Fan connected with individual PVC air deviation.

Chimney bodies in living rooms.

Ventilation installation in the garage.

Natural ventilation in the basement.

Common parts of the building:

Flooring of stairways and stairways landing: Natural stone – granite.

Railing of stairways cage of forged iron.

Walls: Gypsum plastering and latex paint.

Lift: Electrical, with capacity of 4 people from the basement to the last floor.

Additional Clarifications:

Kitchen equipment: against additional agreement and payment.

Air conditioner: installation of outer and interior bodies against additional agreement and payment.

The furnishing in the drawings is just for orientation and is not included in the price (except the sanitary premises).

The common parts of the building together with the surrounding common areas are delivered completely finished. Gardens are delivered planted.